FJ Cruiser Fender Flaps
Front mud flap modification kit that can increase up to 2″ of additional tire clearance and help reduce/eliminate common tire scrape/rub from new tires. Will solve scrape/rub without BMC provided scrape/rub is minor usually driver’s side while making a hard left turn. If scrape/rub is more significant and hits body mount, then BMC is normally required and the FLAPS then provides a great cover-up for the plastic area of the mud flap that must be cut away. The FLAPS are intended for those who wish to use their factory flares and mud flaps. Everything needed is included in the kit and the modification can be done in less than an hour with basic tools.
- MADE IN U.S.A
- EASY INSTALLATION
- CLEAN FACTORY-LIKE APPEARANCE
- DESIGNED SPECIFICALLY FOR FJ CRUISER/ ALL YEARS
- EFFECTIVE COVER-UP IF YOU HAVE A BMC
- NEOPRENE RUBBER RESISTANT TO OILS AND CHEMICALS
- ADDS 2″ OF TIRE CLEARANCE
- ELIMINATES OVER-SIZED FRONT TIRE SCRAPE
- PATENT PENDING
FJ Fender Flaps – Parts Included
- (2) FJ FENDER FLAPS
- (1) Paper cut-out template
- (2) Large paper clips
- (6) Black retaining pins
- (2) Pieces 3/4″ x 3″ foam tape
- Installation Instructions
Tools Needed
- Sharp scissors or razor knife
- 3/16 punch or awl
- Sharpie (red fine point)
- 10mm socket wrench
- Body panel removal tool
jeff lee (verified owner) –
this product solved my tire rub issues. I did the bmc previous but the stock flap bump was still the issue. youtube videos and included instructions made installation a breeze. I highly recommend this product.
Eric (verified owner) –
Outstanding Product! Great installation videos and the template fits so perfectly. Its always satisfying to install something you can tell is well designed.